1-608-987-4500

Store

Call or email for discounts.
Buy Online, call or email us.
You can also buy through your favorite distributor.

Help Me Choose

Series 860 3-Wire Pressure Transducer from 0.25"

$160.00
Series 860 3-Wire Pressure Transducer from 0.25

Series 860 3-Wire Pressure Transducer from 0.25"

$160.00
Model Number: 860D

  • Low cost with high reliability

  • Available in pressure ranges from 0/0.25”WC up to 0/15PSI, including bi-directional such as -5"/5", reverse acting such as -5"/0" as well as unequal bidirectional ranges such as -3"/5"

  • Custom output ranges available such as 2.76-3.33 Vdc

  • Output stability of 0.5% FSO

  • Perfect for a variety of air and inert gas applications such as duct static, VAV and fan control

  • Dual die sensor allows for the best temperature correction



  • Buy 5 at $144.00
  • Buy 10 at $128.00
  • Buy 20 at $112.00
Please select the output signal
Custom Output - Enter Only if Custom Output is Selected - Example: 2.76-3.33 Vdc
Please enter the pressure range
Enter Pressure Range - Example: 0/3" or -50/50 pascal. Span must be 0.25" or greater.
Maximum quantity exceeded
Minimum purchase amount of 1 items is Required
Maximum purchase amount of 0 is Allowed
Your Price: $160.00
160.000
A one-time price of $160.00 will be added to your order.
Facebook
Email
LinkedIn
  • Description
  • Specifications
  • Low cost with high reliability
  • Available in pressure ranges from 0/0.25”WC up to 0/15PSI, including bi-directional
  • Output stability of 0.5% FSO
  • Perfect for a variety of air and inert gas applications such as duct static, VAV and fan control
  • Easy wiring via a pluggable screw terminal block
  • Pressure range calibrated to customer’s specific requirement
  • Able to handle high overpressure
  • Internally conditioned allowing it to automatically accept unregulated 12-24 VDC or 24 VAC power
  • Dual die sensor allows for the best temperature correction
  • Each unit is individually temperature compensated

Specifications

Accuracy*: <+/-1.0% FSO
Stability: +/-0.5% FSO/yr
Thermal Effects: +/-0.075%/°C
Overpressure: 1-10”WC = 100”WC
11-20”WC = 10x rated pressure
21-30”WC = 5x rated pressure
Over 30”WC = 45 PSI
FSO Pressure Range: 0/0.25”WC up to 0/15PSI
(bi-directional ranges available)
Compensated Range: 10° to 50°C
Media: Non-corrosive, non-ionic gases
Operating Humidity: 90% RH non-condensing
Operating Temp: -25° to 70°C
Input Supply**: 12-24 VDC/24VAC**
Supply Current:
Load Resistance: 2KΩ minimum on voltage out, 250Ωmaximum loop resistance on 4-20mA output
(500Ω max loop resistance available upon request**)
Output Signal: 1-5VDC, 1-6VDC, 1-10VDC** or 4-20mA*** (call for custom outputs)
Circuit Protection: Output limited and reverse voltage protected
Electrical Connections: Pluggable Screw Terminal Block
Pressure Connections: Barbed fitting for 1/8” ID tubing
Enclosure: Impact resistant ABS plastic
Dimensions: Approx. 3.5” x 2.7” x 1.4” (8.7cm x 6.8cm x 3.5cm)

* Includes non-linearity hysteresis and non-repeatability at a fixed temperature
** An input of 18-24VDC/AC is required to drive a 500Ω load; the same input is also required for a 1-10VDC output
*** 3-wire 4-20mA

Package Drawing


Model Number Description

A typical order number consists of the model number, pressure range, pressure unit, output and mounting connection.

Model Type Output Signal FSO Pressure Range Calibration Pressure
860 D = Differential or Gage* 0…..1 to 5 volts 0…..0.25″WC to 5″WC Customer designated exact FSO
1…..1 to 6 volts 1…..>5″WC to 13″WC
2…..1 to 10 volts** 2…..>0.5PSI to 1PSI
3…..4-20mA (250Ω load) 3…..>1PSI to 5PSI
4…..4-20mA (500Ω load)** 4…..>5PSI to 15PSI
5…..Custom Output

Example: 860D-01 Cal Pressure = 6” WC. “Pressure Range” is not a specific number. Please indicate exact calibration pressure. (This unit has an output of 1-5 VDC and will be calibrated to 6” WC.) If a custom output is needed, the exact output must be specified.

* With a gage application, one of the two ports is vented to atmosphere
** With a 1-10 VDC output as well as with a 4-20mA output that needs to drive a 500Ω load a 18-24
VDC/24VAC input is required.